![]() If you take the standard parallel cable BoB (Break Out Board), then you will need control software (Mach 3 or EMC2) and CAM software to make your G-Code (such as CamBam). If Windows is not selected, we assume Ubuntu/Linuxcnc, but we always contact the customer to confirm in these cases.Click the link to respond. If windows is selected, we install Windows 7 and completely configured under Mach3. Yes, if the redLeaf or redSprout is purchased with the machine, we can completely configure the electronics to use Ubuntu and Linuxcnc. So thats the best I can see for now as far as clarity. The wording on the CNC Machines page makes it look like Windows7 is all that is available. I noticed in the Computer CNC Systems of this webpage that Linux/EMC2 (now called LinuxCNC) is available on the preconfigured systems. Respond:Other Possible Solutions to this Question. Here is a forum of EnRoute dealing with Mach 3. Question #:1180Question:Will the Bluechick v4.2 work with EnRoute CAD/CAM Software? Current SolutionOur machines will work with whatever CAD/CAM software you will like to use Now knowing what you can export from EnRoute, you will need to be aware of what formats you will need for example g-code for(Mach 3 or Planet-CNC/ Linux EMC2/CNC) is what we use to essentially move the motors to cut your design.
0 Comments
Leave a Reply. |